Et munus annilanding fornacis est ad calefacere workpiece ad praefinitum temperatus et calor tractare metallum post quaedam tempus .
Details sunt ut sequitur:
, 1. emendare vel eliminare variis structural defectus et RELICTUM accentus fecit per ferro in casting, cudere, volvens et welding ne deformatio et fregisset workpieces {I}}
, {2. mollit workpiece ut interficiam {{I}}
, 3. Refine frumenti et amplio structuram ad amplio mechanica proprietatibus de workpiece {{I}}
{4. para structuram ad ultima calor curatio (extinguetur, temperatio) {{I}}
Annealing fornacem opus principium:
Through the circulation of the fan, the temperature distribution in the furnace chamber of the annealing furnace is uniform, and the two furnace chambers of the annealing furnace can operate independently, which improves the annealing efficiency. There are two fans in each oven chamber, but no air filter. It is different from the actual situation. The temperature distribution in the furnace is evenly distributed throughout the fan cycle, and the microstructure of the film material is reorganized by heat treatment, thereby improving stability and conversion efficiency. The castings are heated to approximately 950℃and then cooled for a certain period of time to relieve internal stress of the steel castings and welded parts. When the steel is heated, austenite is formed at temperatures below 100 to 200℃, and after cooling, it Est refrigeratum in aere ad relevare internum passiones {{VIII}}
